Technics Taken Care Of Printer (Part 6)

With manual cleanning

To clean head at cartridge in manual. You must discharge it from the place in printer. Its way different depended the printer. For HP printer, for example turn on the printer and open the printer cover, then automatically ink cartridge moved to middle.

Before discharging cartridge, ascertains printer has been turn off by abstracting power cable from electric socket. Discharges cartridge carefully then puts on the table. Use cotton bud, doesn't use alcohol, then cleaned head with cotton bud.

Cleaning process with cotton bud must be slowly. Doesn't sweep cotton bud to plate nozzle. Pays attention to if there are lag dirt in plate nozzle and part of other cartridge. This cleaning process same as before all. For head cartridge is having colour, use only one cotton bud for monochrome to avoid transfer of dirt. After completed resets cartridge to it place in printer.

If still had not setled, prepares hot water around 3/4 transparent/plastic glasses (can be taken away from dispenser) then glued part of nozzle - only part of this only, not all water level cartridge bodies during around 5 minute.

You will see ink exit to the water. Don't fear, your ink will not used up. When inking stream to water has started is fluent may simply nozzle/head also have been enough cleanness. Then lifted cartridge, and dries with cotton bud or smooth cloth.

Beside keep cleaning head, also need to be taken care of is ink don't really used up. When cartridge runs out of ink, resistor in the head can be fired. Most of printer will remind the user when cartridge will run out of ink.