The troubleshooting usulay met when after refilling cartridge

When return the cartridge to tested, if glimmer indicator lamp the result and doesn’t responsive like we are command to printing, so steps must be done :

- Unpluge the usb cable (pc- printer conector cable)

- Unpluge the power cable

- Open the printer cover

- Press the power button and don’t removed

- Connect the power cable to electricity grid

- Hold power button between 5-10 secon then removed

- Press power button again for turn on the printer

- Closed the printer cover

- Wait until the printer normal return

- Ascertain normal printer returns by unpluge power cable and turn on again

- When does printer not show indicator lamp is glimmer so printer is normal

- When does indicator lamp is glimmer repeat the all steps to success.

After several times ink admission fillings, usually cartridge unknow by computer. This matter is posibility because full ink getter sponge. So that sponge necessary washed, then do reset as usual.

Refill ink steps

Cause by various model kind cartridge, various also method to refill. If the refill ink by injection, next are steps to following fo refill the ink by injection :

- Prepare device that is tissue that functioned to absorb and clean if the ink is over flow or spilled and prepare advice to make the hole on cartridge to put into needle to cartridge. But casually every ink refill enclose key punch. And importantest prepare appropriate ink with brand and printer kind or kind your cartridge.

- Several kinds of cartridge usually place to put into ink has passed this hypodermic needle prepared. The place on top and closed with label. Open label then make hole points part on the center.

- Take injection, then fill ink that be injected. Afford capasity of ink in injection not excessive. Suit with the capasity. Or if you applying for injection ink with injection tool, when to inject the ink do with slowly and carefull, don’t until overflow, if feel enough, stop to inject. End with unplug ink injection tool.

- Cleaning ink if overflow by kleenex. After that close the hole with cellophane tape. And cartridge alredy to used.

Those steps also applied in colour ink. But don’t fill the colour ink is wrong. Because if we have fill ink colour, will have the result of print disagree with colour we wanted. This matter cause colour has been mixed in cartridge. Than finish your printer ink refill steps.

The reason, why can person the printer ink contents self ?

Although there are level indicator for ink contents capacity in cartridge, but that only estimate that given computer. Surely we still not yet can determine to how much sheet again ink contents that still can be used.

A moment printing requirement on the day time we may not more disappointed when fresh out of ink, because can be going to ink fill service, however if you need at night (midnight) there is no store that open.

Well moment like here's our ability in refill printer ink self need so much. Cause we enough to prepare reserve ink in the bottle only. So anywhen the ink is fresh out, we are direct can fill self without play around with delaying work (“remember time is money”).

Apart from reason also there moment when we exploit ink refill service, we don't know is ink packed into by cartridge as according to maximal capacity from cartridge itself. If not appropriate, would increasingly adds expensive of ink refill. However if we can fill the ink self, so how much the many the ink can be filling, that is cost we pay.